Quality guide · From inside the factory

High quality furniture: how do you assess quality before buying?

High quality furniture is judged by its timber, drying, assembly and finishing, rather than polish or photographs alone. Drawing on Two Brothers factory experience in Damietta since 1994, this guide explains the signs that distinguish furniture designed to last for decades from furniture that deteriorates after a few years.

  • Since 1994A factory in Damietta
  • Dried beech woodSelected and dried at the factory
  • ISO 9001 · 14001Quality and environmental certificates
  • 11 countriesDestinations for our furniture exports
  • Lifetime warrantyAgainst manufacturing defects

At a glance

High quality furniture uses suitable, properly dried timber, strong joints, good finishes and upholstery, and a clear manufacturer’s warranty. Timber drying is a key factor: undried wood may crack or warp over time regardless of its appearance. At Two Brothers, we use dried beech wood and allow it to stabilise before production. We hold ISO 9001 and ISO 14001 certificates and provide a lifetime warranty against manufacturing defects.

Eight signs of high quality furniture

1. Dried timber

Properly dried timber helps prevent cracking, warping and movement in doors and drawers as the weather changes. Ask the factory specifically about drying.

2. Suitable timber

Different materials suit different parts: beech for frames and carving, veneer or MDF for smooth surfaces, and plywood for areas exposed to moisture.

3. Strong assembly

Interlocking, glued wooden joints are stronger than relying on nails and staples alone. Open a drawer and inspect its corners.

4. Weight and stability

Gently test the piece: good furniture should feel stable without creaking, with its legs sitting level on the floor.

5. Clean carving

Good hand carving has clear depth and balanced details, without broken edges or rough fibres.

6. Even finishing

A good paint finish has consistent colour, without bubbles or runs, and also covers rear and internal areas.

7. Firm upholstery

Look for straight stitching, taut fabric without wrinkles, and foam that returns to shape after pressure.

8. A written warranty

A manufacturer confident in its work provides a clear warranty. At Two Brothers, this is a lifetime warranty against manufacturing defects.

Comparing furniture woods and materials

This general comparison of common furniture materials in Egypt helps explain what you are paying for:

MaterialCompositionAdvantagesNotes
BeechNatural hardwoodStrong, uniform and suitable for detailed carving and paintingCommon in classic Damietta furniture; proper drying is essential
OakNatural hardwoodVery hard, with distinctive attractive grainGenerally more expensive and often chosen for modern furniture and pieces displaying natural grain
PineSoftwoodLightweight, less expensive and easy to workLess hard; often used in internal frames and economical furniture
PlywoodCross-laminated wood veneer layersDimensionally stable and generally more moisture resistant than standard MDFUseful for backs, drawers and areas exposed to moisture
MDFCompressed wood fibresA very smooth surface suited to paint and solid coloursVulnerable to direct water exposure and unsuitable for deep carving like natural timber

The material choice matters, but using each material in the right place is just as important to the piece’s lifespan.

How do we maintain quality at Two Brothers?

Selection and drying of beech wood before manufacturing at Two Brothers factory in Damietta
Selection and drying of beech wood before manufacturing at Two Brothers factory in Damietta
  1. Timber selection

    We use dried beech wood and allow it to stabilise before production to help avoid cracking or warping over the years.

  2. Hand carving

    Classic and neoclassical details are carved by Damietta craftsmen who inherited the trade.

  3. Assembly and checks

    We assemble the complete frame in-house and check every joint before finishing.

  4. Finishing and inspection

    Painting and upholstery use your chosen materials, and each piece is inspected before dispatch.

Common mistakes when buying furniture

  • Judging a piece only from a photograph or the shine of its finish.
  • Not asking about timber, drying, or materials used for the backs and drawers.
  • Buying standard dimensions without measuring the room, doorways and stairs.
  • Overlooking hinges and drawer runners in wardrobes and kitchens.
  • Not obtaining the warranty and delivery schedule in writing.
  • Choosing the lowest price without comparing what is included.

Also read about Damietta furniture and buying directly from a factory.

Furniture quality FAQs

How do I recognise high quality furniture?

Check the timber and drying, joint and drawer strength, stability, clean carving, even paint and firm upholstery. Request a written manufacturer’s warranty.

What is the best wood for furniture?

No single timber is best for every purpose. Beech is excellent for classic furniture and carving, oak offers strength and attractive grain for modern pieces, and plywood suits parts exposed to moisture. Correct drying and appropriate use are essential.

What is the difference between beech and oak?

Beech is a hardwood with a uniform appearance, suitable for detailed carving and painting, and common in classic Damietta furniture. Oak is harder with more prominent grain and generally a higher price, making it popular for pieces that display the grain.

What is the difference between MDF and plywood?

MDF consists of compressed wood fibres with a smooth surface suited to paint, but it is vulnerable to water. Plywood comprises cross-laminated veneer layers and is generally more stable and moisture resistant. It is used for backs, drawers and kitchen cabinets.

Why does wooden furniture crack?

A common cause is timber that has not been dried adequately. It loses moisture after manufacturing, causing shrinkage, cracking or warping. We therefore dry the timber and let it stabilise before production.

What does a lifetime warranty against manufacturing defects mean?

It means Two Brothers is responsible for defects caused by manufacturing throughout the product’s life. Warranty details are clarified when agreeing on the order.

See the quality for yourself

Visit our showroom and factory in Damietta, or request a video showing production of the design you like.

Two Brothers Furniture · Port Said Road, next to the transmission station, Damietta, Egypt · Saturday–Thursday from 9:00 am · Landline +20 57 2188194